BY DAWN KLINGENSMITH
What any homeowner must consider before buying a new front door
Your front door serves several purposes. It lets in sunlight and guests, and keeps out the cold. It’s the backdrop for your holiday wreath and your first line of home defense. It contributes to overall curb appeal. Because it does all this in the face of constant outdoor exposure and daily use, your front door may be well past its prime and within a few slams of needing a replacement. Here are five tips to help you select the best door for your home and lifestyle.
1. Find the perfect fit
Like a recruiter, you’re looking to fill a specific opening so eliminate candidates that aren’t the right fit.
The first question to ask yourself is, ‘What size is the current entry?’ Replace like with like.
That’s because to do otherwise would mean redoing the door framing – a far too costly and complicated job unless you happen to be remodeling.
Sticking with the same measurements does not limit your options to the same type of door. For example, you can, in many cases, go from a double door to a door with two sidelites (glass panels on each side) without any problems or major modifications to the opening, or to an oversize single door with one sidelite.
2. Consider the architecture
The new door needs to fit more than just the opening.
Your front door should complement your home’s architecture and not look too out of place in the neighborhood. It can stand out and be a bit daring but it should work with everything else – the brick or siding, the roof, and all the other fixed materials of the house.
Choose an appropriate door style (contemporary, traditional, rustic) and finish (paint or stain) for your home. Bright colors including red, turquoise, cobalt and yellow are gaining in popularity. For wood tones, knotty alder is popular these days for an authentic distressed look.
3. Balance the glass
Decide how much glass you want for aesthetic and practical purposes. This is the second question to address, after the size of the existing entry, since the type and amount of glass greatly affects price.
You can have as little as a peephole on up to a “full lite” door that has top-to-bottom glass to let in natural light. In between are Craftsman-style doors with lites (glass inserts) just at the top, half-lite doors and doors with transoms.
People are moving to doors that don’t have as much glass.
The popularity of painted doors may be the reason, as well as privacy and safety concerns. But door glass can be textured, frosted or opaque for varying degrees of privacy. Break-ins are a legitimate concern, but the glass used in door assemblies typically is triple-paned and tempered. There’s even severe-weather glass rated for high-velocity wind zones.
Coated “low-e” glass prevents UV rays from fading your interior woodwork and furnishings, Hampton says.
4. What’s the weather?
Take into consideration your door’s exposure to the elements. No covered entryway? Then you’ll need tougher materials.
Uncovered doors that receive direct sun exposure should be made of longer-lasting materials such as fiberglass, aluminum or steel and south- and west-facing doors take a harder beating. Wood doors typically do not hold up well in sunlight and extreme weather and require more maintenance.
Most fiberglass doors are textured and stained to look like wood, but they are better suited for harsh climates and require little maintenance. Metal doors are usually cheaper than wood and fiberglass, but despite metal’s reputation for toughness, Consumer Reports testers concluded that it’s “not the best choice for wear and tear.”
When weather-beaten doors need to be re-varnished, it’s recommended to apply no fewer than four coats of marine urethane.
5. Security matters
Explore your lock options – but don’t stop there. If security is a top concern, now is the time to upgrade your door locks. There are different types to choose from, but all can be rendered useless by one powerful kick. When a burglar kicks in a door, the door itself seldom breaks (wood, fiberglass and metal doors performed just about the same in Consumer Reports’ battering ram test) nor does the lock fail. Instead, the doorjamb splits.
Steel reinforcements can be installed to strengthen the jamb where the deadbolt engages. Kik Gard and Bandit Latch are two manufacturers that offer products specially designed for this.